AU Class
AU Class
class - AU

Maximizing Efficiency of Projects with Civil 3D: Know When to Hold 'em, Know When to Fold 'em

このクラスを共有
ビデオ、プレゼンテーション スライド、配布資料のキーワードを検索する:

説明

With today's rise in construction, design costs, and extremely tight budgets for CAD work, we must ensure we are using the most-efficient methods in Civil 3D software to meet project demands. We can easily go over budget by overmodeling in Civil 3D. Conversely, when we fail to properly use Civil 3D tools, we can waste time and money. So herein lies the question: When do I fully model and design something, and when do I draw some polylines? When do I hold, and when do I fold? Let's take a journey into how a complex corridor model may not be best for a site plan where a feature line is sufficient. A simple polyline can represent and benefit more than a full creation of a pipe or pressure network system. As we look at keeping some things simple, there are times to make all the abilities of Civil 3D work for us. Longer roadway projects may require conditional corridors and complex targeting. How much is too much? There comes a time to think through all scenarios—or just simply show the cards.

主な学習内容

  • Learn about maximizing the efficiency of Civil 3D.
  • Discover benefits of the complexity of Civil 3D.
  • Learn the benefits of keeping it simple in Civil 3D.

スピーカー

  • Jeremy Rogers
    Jeremy Rogers is an adjunct professor at Austin Community College in Austin, Texas, for the past 5 years,  Jeremy has a passion for giving back to an industry (Civil Engineering) that has been an extremely rewarding and lucrative for him.  Jeremy uses his influence in the community and the industry to assist his students in finding careers they can all be proud of.  On top of that, Jeremy has been in Civil Engineering since June of 2000.  Jeremy has escalated his career from beginning drafter, to senior designer, to now helping manage civil engineering projects across the nation.  Jeremy has been a vital part of the Regional CAD Coordinator role for Kimley-Horn for many years and currently oversees a firmwide initiative to hire more CAD Operators and Designers across the nation. Jeremy helped start the CAD Intern program at Kimley-Horn and developed Fellowship of CAD Users and Designers (FOCUS+D) to bring the CAD community within Kimley-Horn together. While mentoring is a passion for Jeremy, he is also a project manager for Single-Family Master Plans, Multi-Family projects, not to leave out commercial and industrial site plans. Jeremy continues to have a passion of influencing and developing others, connecting people to people, and truly bringing out the best in everyone.
Video Player is loading.
Current Time 0:00
Duration 31:46
Loaded: 0.52%
Stream Type LIVE
Remaining Time 31:46
 
1x
  • Chapters
  • descriptions off, selected
  • en (Main), selected
Transcript

JEREMY ROGERS: Maximize efficiency in Civil3D. We're going to talk about today, knowing when to hold them, knowing when to fold them. Let's talk about when to fold the design by saying, hey, man, that's far enough. We've gone. We've taken the design where it needs to go. Let's just fold our hand and let's move forward. Or when is the time to actually hold on to it? Let's put the effort up front now to save ourselves some headaches on down the line.

My name is Jeremy Rogers. I'm a project manager at Kimley-Horn. I'm going to give you a little bit of introduction about myself. And I know you're not here to listen to my whole biography, or to learn a whole lot about me, but I want to give you a background of where I came from to where I'm at now so that you understand where my thought process is and where I'm coming from.

So I started here in the Civil Engineering industry back in 2000. I worked for a big corporation at the time, I worked for them for about seven years. And then I went to a smaller firm, mom and pop shop of about six to seven employees. And then took kind of a sabbatical from engineering. And I got back into engineering the last 10 years here at Kimley-Horn and Associates. We're a company of about 8,500 plus employees at the time.

But it just goes to show that I've worked in the corporate setting, I've worked in the smaller shops, and now I'm back in the corporate setting helping train people. I started out my career as a beginning, just a drafter. Not just a drafter, I was a drafter, CAD technician. And I progressed up to designer and senior designer. And now I'm a project manager with Kimley-Horn. So I've worked my way up, and now I just oversee projects.

Here at Kimley-Horn, I've been the regional coordinator overseeing about 19 or 20 offices across the state of Texas to make sure that we're staying efficient, make sure that we're staying productive. Just making sure everything's going on down the line. I'm also an adjunct professor at a local community college, Austin Community College there in Austin, Texas. It's a way for me to give back to engineering, but it's also a way for me to bring interns into our firm and give them a lucrative career that they so well deserve. I bring real world applications into the classroom to help our students understand exactly what they're getting into when they get into this industry.

So as you can tell, I've started out the career beginning drafter all the way up to senior designer to project manager, where my focus starting out was red lines, making sure that we got the plan sets created. Then my next focus was the design, making sure the design was intact. And then senior designer making sure that we're being efficient, we're staying under budget. And now as a project manager, that is my main goal, to make sure all of these key things take place, that we're staying under budget, and we're maximizing our efficiency in Civil3D.

So a little bit of an agenda of what we're going to cover today. We're going to start out, hey, when do we keep it simple? Let's talk about knowing again, when to fold. That's far enough in our design. Let's just keep it simple in our design. We don't need to take this any further.

Then we're going to talk about when to actually model, when it's time to hold on to that design. Let's put forth that effort right now. It's not going to cause us headaches on down the line. And then we got to know when to go all in, when we just got to put all of our cards on the table. When we got to just make sure that this design is solid, we're going to spend all the money up front because it's going to be either a digital delivery.

We've got to make sure that we're under a lot of eyes that are really focused on this design. So we need to know when to go all in on this design. And then we'll wrap it up with just a summary.

So let's start out. It's knowing when to hold them or knowing when to fold them again. Fold that design. Fold your hand. We've taken this design far enough, and just the benefits of keeping it simple in Civil 3D.

So Kimley Horn, we're growing at a rate of about 15% per year. So we get a lot of new hires coming in. You don't have to read this screen. I'll talk you through it. We get a lot of engineers and training or CAD technicians that are either straight out of school or they're two years into their career. These guys are hungry. They want to make the most out of their career. They want to do all the coolest features that Civil 3D has to offer. They want to do all the cool things we're doing here at AU. Learning what the future is and bringing all those things to the table. They're trying to make a mark in their world. They're coming in. They want to prove themselves to us, that they know exactly what they're doing.

But our job as senior people in the firms or even beginning CAD technicians in the firms, we must educate on the right way to make money while still holding on to that passion. We want them still to be passionate about what they're coming in and doing. We want them still to be passionate about Civil 3D. But let's educate them on the right way to make money.

And how do we do that? We educate them on when to use pipe networks or when a simple polyline is going to do the job. When should we actually take the time to do an alignment in a profile? Do we have to show that on the plans? Is this a 3D deliverable or does it really even matter how it looks in CAD? Are we really painting a picture on some construction documents? Those are the questions that we must ask ourselves starting out.

All of this really starts out with a good project folder, a good project template. We've got to be efficient. Like I said, we grow rapidly at Kimley-Horn, just like a lot of you guys are growing as well. You get a lot of new users coming in, so we've got to keep it simple from the start. And that starts out with plan sheets with viewports and legends, plan sheets with layer control that already implemented, base files that already have xrefs that are already overlaid into them.

So I want to show you a slide here of a typical project folder at my office. This is taken directly from my office. Ignore the list routines, ignore the executables. Let's focus on the DWG files right here. So if you focus on the left side of your screen, I've got some reference files.

As you can see, I have an O storm file, an O surface EG file, I have an O surface FG file, O wastewater, O water. And then get into some X files, X site, X storm, X wastewater. The reason that we have all these different files is, as a newer user comes in, they don't know, hey, do I draw this in 3D? Is this going to be an x ref? Do I draw this only in 2D? So we separated these files to help it become more efficient.

So our newer users know that, hey, in these O files, we're going to actually spend the time and draw the Civil 3D objects in there. In these X files, hey, a simple polyline is going to get me through the job. That's all I need to do.

Now, in the middle of the screen, I've got my sheet files listed. These files are already created-- the cover sheet, drainage area maps, paving details, paving plan and profiles. These are the basic sheet files that we need for every project that we have that we work on. Do we occasionally have to add more? Absolutely. We've got to add more files to this. We've got to add more sheet files. But this gets us started. This gets the base file.

And the goal is, the newer user comes in, they open up the erosion control plan. And to your right, when they open it up, you see the sheet file when they open it. The viewport is already set, so they simply double-click in the viewport to get into model space. Zoom extents, boom, everything's already X ref'ed in there. Your viewport is set. This sheet is already cut, pretty much.

Our legend is already in there. It's already created. It already matches what our layer control is in our base files. Our general notes, they're already set in here. Do we have to go back and edit them? Sure. Absolutely. However, it's easier to erase than for us to come in and add more. Occasionally, yes, we do have to add more notes, but it's a good base start to it. And then our title block is already in there.

What you don't see on this screen is typically our north arrow. And our bar scale is already set on the screen as well, so it's just addition to that. But the sheet files are already set. These guys are off and running. We can cut a set of construction plan sheets two to four hours for a simple site plan, six to eight hours for an overall single-family subdivision. We've already got the construction plans cut. The sheets are there. It's time to go back and annotate. We're maximizing our efficiency by taking this forward from the get-go.

So let's get into some of the site design things that will keep it simple for us. And the question is, do we network or not network? So as you look on this screen, the lines drawn in blue are water lines. The line drawn in green is the wastewater. So blue for water, green for wastewater. I've got some storm going on in here. And you must ask yourself the question, am I going to take the time to network this right now with structures, pressure networks, pipe networks, gravity networks? Ask yourself that question.

To me, in the scenario of this one, the answer is no. I am going to simply draw a polyline for my water line, a simple offset of that polyline five feet, another offset of that polyline. That gets me three water lines that are drawn in there. I've got my 45-degree angles set.

There's no need for me to spend the time up front to make sure all my structures are right, to make sure that all of my alignments are correct, to make sure that all of my pressure network matches exactly what we see on the screen. A simple polyline gets the job done.

And you're like, well, what about labels? I can't come in there and just click on it and say Add Label to a structure. No, you can't. But a simple M leader line drawn off of that 45-degree angle, you're done. You copy that over three or four times, this sheet is done. We're off and running. So you're asking yourself, what is my deliverable for this?

Is it a pretty picture that I'm painting just to show where the water's going to go? Absolutely. In this case, it is. Am I going to take the time to actually draw the gravity line of the wastewater, the green line right there? We've got some crossings, maybe a profile. Do I have to show that profile? In this scenario, no. It's a private lot.

But with those crossings, we all know that water is under pressure. So we're not having to profile and show any conflicts in this. The contractor can get out there and loop-the-loop these water lines if they need to be, but they can get around these crossings. There's no need, in this scenario, to spend the time up front to create these pressure networks, these gravity networks. Simple polylines get the job done in this scenario. Let's look at another one.

Here's another site plan. To network or not to network? Again, water lines in blue, green lines in-- or wastewater in green here. Simple polylines would get the job done, right? In this scenario, we've got to look at the bigger picture. We see some stubs going forward here, some stubs going forward here, some more stubs going forward here. That tells me there's multiple phases that are coming to this site plan.

I am absolutely going to take the time to come in and draw the pressure network, or create the pressure network. I'm absolutely going to take the time to come in, create this gravity network, because later on down the line, it's going to save me so much more headaches. I can go back in quickly and figure out what my invert elevation was, where I left off. I've got multiple phases to this retail shopping center. We've got about eight buildings that are going into this project.

So yes, it is time to create the networks for this system, the storm network for this system. You don't see it on this sheet, but the storm network is there. We need to see where those crossings are. Am I going to take the time to profile it?

Probably internally, but I'm not going to take the time to make my profiles look very perfect, with labels and all these different things that go into a profile that you're going to present to a municipality. I am going to take the time to profile it so that I can see my crossings, but nothing to make it pretty. Just a quick, simple profile so that we can see, on the site, exactly what's going on. So in this situation, yes, we're going to take the time to network.

Let's look at a third scenario, single-family subdivision. Are we going to network or are we not going to network? We are 100% going to network this one. With single-family subdivisions, there is so much that goes into these entities. I don't know if I explained to you guys, I do a lot of commercial plans. I do a lot of site plans. I do a lot of single-family plans. I cover it all in the civil world.

When it comes to the single-family subdivisions, they can get monotonous at times, absolutely. But we have to spend that time up front to design these things, because it's going to create less headaches moving on down the line. We are going to take the time to network this one. We have to show profiles. We have to show our crossings. There's a lot of detail that goes into these types of designs. We are 100%, absolutely going to spend that time up front.

So we talked about the simplicities of Civil 3D. Now, let's talk about some of the benefits of the complexities of Civil 3D, knowing when to hold on to that design, knowing when, hey, we've got our cards in our hands. Let's spend that time up front, now, so that later on, we're going to make our life easy.

But sometimes, we do keep it simple. To grade or not to grade is the question with this scenario. Here, we have that simple site plan again. We've got a building, we've got a parking lot coming in here, a median, some ponds over here. We hand this to a beginning EIT person or a beginning CAD technician, they're like, oh, man, this is so cool. I can come in, I can do some corridors, I can do some really cool grading objects in the pond back there. I can probably come in here and 3D model this fire tank, 3D model this truck wash-out bay.

The answer is slow down, my friend. Yes, we can do all these things. We go to a senior designer. The senior designer, he looks at this-- he or she looks at this, and they're going to say, you know what? "Name that tune" kind of style. I can knock this out in eight feature lines. And that's exactly what I did. More than eight feature lines, yes.

However, there is no need to come in 3D model splitter boxes or fire tanks or wash out areas when simple feature lines are going to get the job done. There is no need to use corridors in any aspect of this design right here. Simple feature lines are going to get the job done. Simple updating the face of curb and then a step offset your feature line to the back of curb-- easily done.

You can see the orbital view over here. There's not much that went into this grading, but there was some that went into it that it was enough to feature line, that we did have to grade it to show our contours, to make sure we get some sort of detail as we're moving forward.

Another scenario. To grade or not to grade? Another simple site plan. This is a daycare, a private school. We've got a simple parking lot going on over here. We've got a administration building right here, daycare center-- actually, it's a private school-- going in right here. Playground, gymnasium. Fire lane coming in, looping around.

To grade or not to grade? Are we going to spend the time to create any corridors, or are we going to get this done with 8 to 10 feature lines again? In this scenario, it was worth it for me to spend the time up front to create the corridor. As you can see, in this main drive aisle, I created some assemblies down here.

The reason being, it is a uniformed drive aisle. I'm not shifting and shaping any kind of models right here. I have a uniform drive aisle. I've got some parallel parking up here at the top, I don't know if you saw that on the previous slide. Some parallel parking going in right here, that it's all uniform. So it's worth the time coming in, building a corridor off this feature line to uniformly grade this site as we go through.

So now, all I have to do is update the center line of this site. Everything else updates as it happens. Well, since I've already come in and done corridors for it for this off a feature line, why not go the extra step over here in this parking area and in this parking area? What I did was I created a face of curb feature line using this assembly right here, just for the curb. So anytime I came in and had to update the face of curb, the back of curb already updated for me.

So if I took the time to come in and do a corridor for this one-- yeah, let's go ahead and take the time to come in and do the corridor for this one. We come in here, we've got some splitter boxes or some [INAUDIBLE] going in. Is it worth the time and money to invest right now for that those outlet structures?

To me, the answer is no. We've got details of those outlet structures. Apologize for not having the detail on the screen right now, but we've got details for those outlet structures that come into play, that they will show the details of, that we don't have to spend the time to come in and 3D model those right there.

Over here in this parking lot, did I use any corridors? The answer is no. Maybe along this face of curb over here I did again, just to get that back of curb. But the beauty of site designs and the beauty of asphalt and concrete is we can manipulate that concrete how we want it to go. Simple spot shots are going to get us what we need. This is not a 3D deliverable.

This is not anything that had to be pretty in CAD. We needed to paint a pretty picture on a sheet file with spot grades, so it's more efficient to come in with a uniform corridor along this line and then just simple feature lines for the rest of it. Simple feature lines of our pond. We graded in some headwalls back here in just a make sure our three-to-one slopes work. Simple feature lines got the job done in these scenarios.

To detail or not to detail? Let's talk a little bit more about some single-family design. A lot goes into these single-family designs. We've got our alignments, our corridors, our profiles. We've got intersections, we've got knuckles, we've got cul-de-sacs. Do we spend the time up front to come in and model all those different things?

Well, the answer is yes and no. Do we grade in the intersections from day one? Are we having to detailed lot grade this entire subdivision right now, or can we get away with some block grading ? So the answer when it comes to is not if we're going to detail. It's when we're going to detail these things out.

In this situation, starting out, yes, we take the time to build these corridors, because we've got to have our profiles off to the side showing our paving profiles. We take the time to build these corridors because it's a uniform parabolic crown going along these local roads. Did I take the time up front in starting to do my intersections?

No. Things change. We don't need to come in and 3D model our intersections from the very get-go. Let's save those 3D-- those scenarios for the detail about our third submittal to the city, when we're about to get our permit from the city. Those are the times we really need to go heavy on the detail. We don't need to do that up front.

We want to make sure that our corridors are set, that our roads are good, so that we can get some good dirt numbers. We can come in later in the game and create these intersections. We can come in later in the game to create these knuckles. Yeah, I'm doing some simple feature lines around these knuckles right now, doing a couple of simple corridors around there just to get myself up to par on these details. But I'm not taking the time to fully 3D model these knuckles or these cul-de-sacs until we're further down the line.

Look over here. You see my contours coming in through here? This is just a block grading. My first submittal is probably going in like this. You're like, Jeremy, your grading looks horrible. That's fine. They're not judging me on my grading right now. I'm getting a good dirt number. I'm getting a good base.

The municipality, the city, may come back and say, hey, your lot over here is off. We need you to tweak that. Or we don't like this street here. We need you to move that street. It would take me more time and effort to go back and redo all those streets if I did all that design up front than if I do the minimal design right now. Second, third submittal, then we take the time to come in and really 3D model these things.

Speaking of grading, here was the final product of this. We did come back in. We did model the intersection. Did come back in, I did model my knuckles. I did model my cul-de-sacs over here. You can't really see it very well. But look at the interior between these two blocks. In this scenario, the developer came in and said, I don't know who's going to buy these homes just yet. I don't know who's going to buy these lots just yet.

So I just had to do some block grading. I had some spot shots going on in the background to make sure everything was happening. In fact, in this scenario right here, I had some spot shots showing me the slopes to making sure everything was going to happen so that when I came back to this design right here, I knew exactly that I was going to get my 2% across my lots, or 4%, or whatever the developer's criteria might be.

Once we get this to the developer, once the developer goes out there and they start doing their earthwork, they start doing their design, then they sell this off to a home builder. The home builder is going to come back to us, and then we're going to have to detail lot grade these based upon what the home builder's criteria is.

So we've got to check our scope. What does our scope say that we have to do? Do we block grade now, do we detail lot grade now? In some scenarios, it's not when you're going to detail-- or it's not if you're going to detail, it's when you're going to detail. We are not fully grading this out until we're getting close to permit.

Let's look at some other designs. Here's a multi-family site. This multi-family site was pretty tricky. We had a lot of walls going on, had a lot of stairs going on. We had some spacing constraints where it was really causing some headaches and difficulties. We've got ADA to take care of, American Disability Act to take care of, when we're grading these multifamily sites. Those can be tricky.

2% cross slope, 5% slope going lengthwise. We've taken those into account. Are we spending the time up front to detail that out from day one? No. Let's get our earthwork in there. Let's get our feature lines in there. Let's get some simple corridors through these thoroughfares in there where we can. Let's build that out first. Let's wait until that second, third submittal before we are truly detailing out these stairs.

Why did I have to go in and detail out these stairs? Well, it was a 3D deliverable. The contractor wanted to make sure everything was working. Like I told you guys, we had some pretty space constraints with the architect to make sure everything was going to fit. So I ended up having to take the time about that second or third submittal to come in and actually detail out these stairs right here.

What about these walls? Let's talk about walls for a minute. When do we have to get those walls into place? Take this scenario into account. A lot of walls right here. Here's the actual construction site view of it. Down below is the 3D orbital view. Down below, do you guys think that's the first submittal or the third submittal right before permit?

The answer was first submittal. Why is that? Reason being, walls. We've got to get that contractor on board up front with these walls so that they're going to meet their criteria. Are these walls going to change as we go through our design? Yeah, probably. But let's at least get that wall contractor on board up front and early so that they know what they're up against as well, so that we're not holding them back with our submittal as we get into it.

So it's worth the time and effort right now to hold on to this design, to do it up front, so that we can get everybody else up and running. So we talked about some simplicity stuff. We talked about when to hold that design, when to actually go all in to that design right now. Now, let's actually get even further. When are we actually going to go all in on our design?

And the question you have to ask yourself is, would you spend $15,000 of your own money to create this now. And what do I mean by create this? At Kimley-Horn, we have a plethora of custom commands that we use in our Civil 3D. This is an actual screenshot of my Civil 3D application at work. We've got our own ribbon tab. You see that KHA-FW, meaning Kimley-Horn Firm-Wide Tab. All of those are custom commands that we have.

I get asked all the time, Jeremy, hey, man, it'd be great if we had this command. It would make my life so much easier if we could create this command that would do this simple thing. My question back to them is, hey, that's a great idea. Are you willing to spend $10,000 to $15,000 of your own bonus money for us to go create this?

Sometimes, the answer's, yeah, man. I really think it would save me that much time. And then sometimes, the answer is, no way, dude, I'm not spending my own money to go create that. Well, then why should we spend the company's money to go create that? When is it time? Should we write that Dynamo script, should we write that LISP routine? Is it worth our time and money to create this?

If it's going to save us a couple of hours right now and it doesn't matter in the future what we just wrote or if we created that command, the answer is no. We don't need to spend the time and money and effort right now up front to create that.

If the answer is, yeah, it's going to save us a couple of hours right now on this, but it's going to save us millions of dollars in the future by creating this command and it's only going to take me five clicks to do this application versus the 20 to 30 clicks that it takes right now-- how many of us get the time-- or paid by the clicks that we make? Just kidding.

But is it worth that time right now to spend to where it's going to save us a lot of money on down the line? If the answer there is yes, 100%, let's get into it. Let's create that. Let's create the Dynamo routine. Let's create the LISP routine. Let's do the .NET experience. Let's make the time and effort to make that happen.

To create or not to create? I have a guy that sits up in our Twin Cities office. His name is Andy Bosch. He loves his conditional corridors, his conditional assemblies. Up in this top right corner-- or top left corner right here, this is one assembly that he used for miles upon miles upon miles of roadway design that he did.

This guy is amazing when it comes to creating these things. He's spending that time up front to create these conditional assemblies because in the long run, down the road, it's going to save him so much time, so much headaches. In this scenario, we did go all in. We spent that up front 10 to 15 hours of creating these things. It probably doesn't take him that long. To me, it would probably take me a week to create what he just created right here nowadays, since I'm more project management side than the CAD side.

But we had to go all in, reason being, the agency's going to request some cross-sections. Every 50 feet, we're going to have to create this cross-section. Every 100 feet, we've got to show them a cross-section. Let's create it. This model is actually used in construction. This was an actual 3D deliverable that we had to give to the DOT, the Department of Transportation. They used the model for their design, for their construction.

Definitely had to spend the time, the effort up front to create these amazing, complex models, because it's going to save us time in the long run. Question being, though, when you are creating this, who are you training behind you that's going to be able to come in and take this over? Someday, Andy's going to retire. I think he told me five years. Good for him, man. He's still young. I love that.

But he's going to retire. He's going to go on vacation. He wants to take some time off with his family too. Who's going to come in and be able to manipulate this design? So as we're creating these things, we've got to take that simplicity into account as well. We've got to remember, hey, who's going to come in behind us to take over when we're not there that day? What if we're sick? What if we're out in the hospital for whatever reason? What If we are not there?

Who's going to be able to come in and take that time to take this over? Those are the questions we have to ask. But right now, 100%, absolutely worth the time to spend up front-- digital delivery. Agency required it. You had to use this model in construction.

So in summary, let's keep this simple. Let's encourage the passion. Again, we must educate on the right way to make money while we're still keeping this passion. What does my scope say to do? What does the design-- what needs to be shown? Does it require this detailed construction behind the scenes? Does CAD actually have to show all these details at the time? If the answer is no, let's fold. Let's fold our hand. That's far enough. Simple polylines are going to get the job done.

Are there chances for multiple conflicts in the drawing or construction? If so, then yeah, let's hold our hand. Let's get that design done up front. Is it worth building now, or am I going to struggle with it later? Who's going to pick up this design? Who's going to pick up this design while I'm on vacation? There will come a time when digital delivery must be exact. But we must ask our question-- is that today? Thank you.

______
icon-svg-close-thick

Cookieの設定

弊社にとって、お客様のプライバシーを守ることと最適な体験を提供することは、どちらも大変重要です。弊社では、お客様に合わせてカスタマイズした情報を提供し、並びにアプリケーションの開発に役立てることを目的に、本サイトのご利用方法についてのデータを収集しております。

そこで、お客様のデータの収集と使用を許可いただけるかどうかをお答えください。

弊社が利用しているサードパーティのサービスについての説明とプライバシー ステートメントも、併せてご確認ください。

サイト動作に必須:オートデスクのサイトが正常に動作し、お客様へサービスを提供するために必要な機能です

Cookie を有効にすることで、お客様の好みやログイン情報が記録され、このデータに基づき操作に対する応答や、ショッピング カートへの商品追加が最適化されます。

使用感が向上:お客様に最適な情報が表示されます

Cookie を有効にすることで、拡張機能が正常に動作し、サイト表示が個々に合わせてカスタマイズされます。お客様に最適な情報をお届けし、使用感を向上させるためのこうした設定は、オードデスクまたはサードパーティのサービス プロバイダーが行います。 Cookie が無効に設定されている場合、一部またはすべてのサービスをご利用いただけない場合があります。

広告表示をカスタマイズ:お客様に関連する広告が表示されます

Cookie を有効にすることで、サイトのご利用内容やご興味に関するデータが収集され、これに基づきお客様に関連する広告が表示されるなど、効率的な動作が可能になります。また、継続的にデータを収集することで、お客様のご興味にさらに関連する広告を配信することが可能になります。Cookie が無効に設定されている場合、お客様に関連しない広告が表示される可能性があります。

icon-svg-close-thick

サードパーティのサービス

それぞれの情報で弊社が利用しているサードパーティのサービスと、オンラインで収集するお客様のデータの使用方法を詳しく説明いたします。

icon-svg-hide-thick

icon-svg-show-thick

サイト動作に必須:オートデスクのサイトが正常に動作し、お客様へサービスを提供するために必要な機能です

Qualtrics
弊社はQualtricsを利用し、アンケート調査やオンライン フォームを通じてお客様が弊社にフィードバックを提供できるようにしています。アンケートの回答は無作為に選んだお客様にお願いしておりますが、お客様から自発的に弊社にフィードバックを提供することも可能です。データを収集する目的は、アンケートの回答前にお客様がとられた行動を、より正しく理解するためです。収集したデータは、発生していた可能性がある問題のトラブルシューティングに役立てさせていただきます。. Qualtrics プライバシー ポリシー
Akamai mPulse
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Akamai mPulseを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Akamai mPulse プライバシー ポリシー
Digital River
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Digital Riverを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Digital River プライバシー ポリシー
Dynatrace
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Dynatraceを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Dynatrace プライバシー ポリシー
Khoros
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Khorosを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Khoros プライバシー ポリシー
Launch Darkly
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Launch Darklyを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Launch Darkly プライバシー ポリシー
New Relic
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、New Relicを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. New Relic プライバシー ポリシー
Salesforce Live Agent
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Salesforce Live Agentを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Salesforce Live Agent プライバシー ポリシー
Wistia
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Wistiaを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Wistia プライバシー ポリシー
Tealium
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Tealiumを利用しています。データには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Tealium プライバシー ポリシー<>
Typepad Stats
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Typepad Statsを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Typepad Stats プライバシー ポリシー
Geo Targetly
当社では、Geo Targetly を使用して Web サイトの訪問者を最適な Web ページに誘導し、訪問者のいる場所に応じて調整したコンテンツを提供します。Geo Targetly は、Web サイト訪問者の IP アドレスを使用して、訪問者のデバイスのおおよその位置を特定します。このため、訪問者は (ほとんどの場合) 自分のローカル言語でコンテンツを閲覧できます。Geo Targetly プライバシー ポリシー
SpeedCurve
弊社は、SpeedCurve を使用して、Web ページの読み込み時間と画像、スクリプト、テキストなど後続の要素の応答性を計測することにより、お客様の Web サイト エクスペリエンスのパフォーマンスをモニタリングおよび計測します。SpeedCurve プライバシー ポリシー
Qualified
Qualified is the Autodesk Live Chat agent platform. This platform provides services to allow our customers to communicate in real-time with Autodesk support. We may collect unique ID for specific browser sessions during a chat. Qualified Privacy Policy

icon-svg-hide-thick

icon-svg-show-thick

使用感が向上:お客様に最適な情報が表示されます

Google Optimize
弊社はGoogle Optimizeを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Google Optimize プライバシー ポリシー
ClickTale
弊社は、弊社サイトをご利用になるお客様が、どこで操作につまづいたかを正しく理解できるよう、ClickTaleを利用しています。弊社ではセッションの記録を基に、ページの要素を含めて、お客様がサイトでどのような操作を行っているかを確認しています。お客様の特定につながる個人情報は非表示にし、収集も行いません。. ClickTale プライバシー ポリシー
OneSignal
弊社は、OneSignalがサポートするサイトに広告を配置するために、OneSignalを利用しています。広告には、OneSignalのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、OneSignalがお客様から収集したデータを使用する場合があります。OneSignalに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. OneSignal プライバシー ポリシー
Optimizely
弊社はOptimizelyを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Optimizely プライバシー ポリシー
Amplitude
弊社はAmplitudeを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Amplitude プライバシー ポリシー
Snowplow
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Snowplowを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Snowplow プライバシー ポリシー
UserVoice
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、UserVoiceを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. UserVoice プライバシー ポリシー
Clearbit
Clearbit を使用すると、リアルタイムのデータ強化により、お客様に合わせてパーソナライズされた適切なエクスペリエンスを提供できます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。Clearbit プライバシー ポリシー
YouTube
YouTube はビデオ共有プラットフォームで、埋め込まれたビデオを当社のウェブ サイトで表示および共有することができます。YouTube は、視聴者のビデオのパフォーマンスの測定値を提供しています。 YouTube 社のプライバシー ポリシー

icon-svg-hide-thick

icon-svg-show-thick

広告表示をカスタマイズ:お客様に関連する広告が表示されます

Adobe Analytics
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Adobe Analyticsを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Adobe Analytics プライバシー ポリシー
Google Analytics (Web Analytics)
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Google Analytics (Web Analytics)を利用しています。データには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Google Analytics (Web Analytics) プライバシー ポリシー<>
Marketo
弊社は、お客様に関連性のあるコンテンツを、適切なタイミングにメールで配信できるよう、Marketoを利用しています。そのため、お客様のオンラインでの行動や、弊社からお送りするメールへの反応について、データを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、メールの開封率、クリックしたリンクなどが含まれます。このデータに、他の収集先から集めたデータを組み合わせ、営業やカスタマー サービスへの満足度を向上させるとともに、高度な解析処理によって、より関連性の高いコンテンツを提供するようにしています。. Marketo プライバシー ポリシー
Doubleclick
弊社は、Doubleclickがサポートするサイトに広告を配置するために、Doubleclickを利用しています。広告には、Doubleclickのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Doubleclickがお客様から収集したデータを使用する場合があります。Doubleclickに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Doubleclick プライバシー ポリシー
HubSpot
弊社は、お客様に関連性のあるコンテンツを、適切なタイミングにメールで配信できるよう、HubSpotを利用しています。そのため、お客様のオンラインでの行動や、弊社からお送りするメールへの反応について、データを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、メールの開封率、クリックしたリンクなどが含まれます。. HubSpot プライバシー ポリシー
Twitter
弊社は、Twitterがサポートするサイトに広告を配置するために、Twitterを利用しています。広告には、Twitterのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Twitterがお客様から収集したデータを使用する場合があります。Twitterに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Twitter プライバシー ポリシー
Facebook
弊社は、Facebookがサポートするサイトに広告を配置するために、Facebookを利用しています。広告には、Facebookのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Facebookがお客様から収集したデータを使用する場合があります。Facebookに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Facebook プライバシー ポリシー
LinkedIn
弊社は、LinkedInがサポートするサイトに広告を配置するために、LinkedInを利用しています。広告には、LinkedInのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、LinkedInがお客様から収集したデータを使用する場合があります。LinkedInに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. LinkedIn プライバシー ポリシー
Yahoo! Japan
弊社は、Yahoo! Japanがサポートするサイトに広告を配置するために、Yahoo! Japanを利用しています。広告には、Yahoo! Japanのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Yahoo! Japanがお客様から収集したデータを使用する場合があります。Yahoo! Japanに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Yahoo! Japan プライバシー ポリシー
Naver
弊社は、Naverがサポートするサイトに広告を配置するために、Naverを利用しています。広告には、Naverのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Naverがお客様から収集したデータを使用する場合があります。Naverに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Naver プライバシー ポリシー
Quantcast
弊社は、Quantcastがサポートするサイトに広告を配置するために、Quantcastを利用しています。広告には、Quantcastのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Quantcastがお客様から収集したデータを使用する場合があります。Quantcastに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Quantcast プライバシー ポリシー
Call Tracking
弊社は、キャンペーン用にカスタマイズした電話番号を提供するために、Call Trackingを利用しています。カスタマイズした電話番号を使用することで、お客様は弊社の担当者にすぐ連絡できるようになり、弊社はサービスのパフォーマンスをより正確に評価できるようになります。弊社では、提供した電話番号を基に、サイトでのお客様の行動に関するデータを収集する場合があります。. Call Tracking プライバシー ポリシー
Wunderkind
弊社は、Wunderkindがサポートするサイトに広告を配置するために、Wunderkindを利用しています。広告には、Wunderkindのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Wunderkindがお客様から収集したデータを使用する場合があります。Wunderkindに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Wunderkind プライバシー ポリシー
ADC Media
弊社は、ADC Mediaがサポートするサイトに広告を配置するために、ADC Mediaを利用しています。広告には、ADC Mediaのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、ADC Mediaがお客様から収集したデータを使用する場合があります。ADC Mediaに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. ADC Media プライバシー ポリシー
AgrantSEM
弊社は、AgrantSEMがサポートするサイトに広告を配置するために、AgrantSEMを利用しています。広告には、AgrantSEMのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、AgrantSEMがお客様から収集したデータを使用する場合があります。AgrantSEMに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. AgrantSEM プライバシー ポリシー
Bidtellect
弊社は、Bidtellectがサポートするサイトに広告を配置するために、Bidtellectを利用しています。広告には、Bidtellectのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Bidtellectがお客様から収集したデータを使用する場合があります。Bidtellectに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Bidtellect プライバシー ポリシー
Bing
弊社は、Bingがサポートするサイトに広告を配置するために、Bingを利用しています。広告には、Bingのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Bingがお客様から収集したデータを使用する場合があります。Bingに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Bing プライバシー ポリシー
G2Crowd
弊社は、G2Crowdがサポートするサイトに広告を配置するために、G2Crowdを利用しています。広告には、G2Crowdのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、G2Crowdがお客様から収集したデータを使用する場合があります。G2Crowdに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. G2Crowd プライバシー ポリシー
NMPI Display
弊社は、NMPI Displayがサポートするサイトに広告を配置するために、NMPI Displayを利用しています。広告には、NMPI Displayのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、NMPI Displayがお客様から収集したデータを使用する場合があります。NMPI Displayに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. NMPI Display プライバシー ポリシー
VK
弊社は、VKがサポートするサイトに広告を配置するために、VKを利用しています。広告には、VKのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、VKがお客様から収集したデータを使用する場合があります。VKに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. VK プライバシー ポリシー
Adobe Target
弊社はAdobe Targetを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Adobe Target プライバシー ポリシー
Google Analytics (Advertising)
弊社は、Google Analytics (Advertising)がサポートするサイトに広告を配置するために、Google Analytics (Advertising)を利用しています。広告には、Google Analytics (Advertising)のデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Google Analytics (Advertising)がお客様から収集したデータを使用する場合があります。Google Analytics (Advertising)に提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Google Analytics (Advertising) プライバシー ポリシー
Trendkite
弊社は、Trendkiteがサポートするサイトに広告を配置するために、Trendkiteを利用しています。広告には、Trendkiteのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Trendkiteがお客様から収集したデータを使用する場合があります。Trendkiteに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Trendkite プライバシー ポリシー
Hotjar
弊社は、Hotjarがサポートするサイトに広告を配置するために、Hotjarを利用しています。広告には、Hotjarのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Hotjarがお客様から収集したデータを使用する場合があります。Hotjarに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Hotjar プライバシー ポリシー
6 Sense
弊社は、6 Senseがサポートするサイトに広告を配置するために、6 Senseを利用しています。広告には、6 Senseのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、6 Senseがお客様から収集したデータを使用する場合があります。6 Senseに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. 6 Sense プライバシー ポリシー
Terminus
弊社は、Terminusがサポートするサイトに広告を配置するために、Terminusを利用しています。広告には、Terminusのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Terminusがお客様から収集したデータを使用する場合があります。Terminusに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Terminus プライバシー ポリシー
StackAdapt
弊社は、StackAdaptがサポートするサイトに広告を配置するために、StackAdaptを利用しています。広告には、StackAdaptのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、StackAdaptがお客様から収集したデータを使用する場合があります。StackAdaptに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. StackAdapt プライバシー ポリシー
The Trade Desk
弊社は、The Trade Deskがサポートするサイトに広告を配置するために、The Trade Deskを利用しています。広告には、The Trade Deskのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、The Trade Deskがお客様から収集したデータを使用する場合があります。The Trade Deskに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. The Trade Desk プライバシー ポリシー
RollWorks
We use RollWorks to deploy digital advertising on sites supported by RollWorks. Ads are based on both RollWorks data and behavioral data that we collect while you’re on our sites. The data we collect may include pages you’ve visited, trials you’ve initiated, videos you’ve played, purchases you’ve made, and your IP address or device ID. This information may be combined with data that RollWorks has collected from you. We use the data that we provide to RollWorks to better customize your digital advertising experience and present you with more relevant ads. RollWorks Privacy Policy

オンライン体験の品質向上にぜひご協力ください

オートデスクは、弊社の製品やサービスをご利用いただくお客様に、優れた体験を提供することを目指しています。これまでの画面の各項目で[はい]を選択したお客様については、弊社でデータを収集し、カスタマイズされた体験の提供とアプリケーションの品質向上に役立てさせていただきます。この設定は、プライバシー ステートメントにアクセスすると、いつでも変更できます。

お客様の顧客体験は、お客様が自由に決められます。

オートデスクはお客様のプライバシーを尊重します。オートデスクでは収集したデータを基に、お客様が弊社製品をどのように利用されているのか、お客様が関心を示しそうな情報は何か、オートデスクとの関係をより価値あるものにするには、どのような改善が可能かを理解するよう務めています。

そこで、お客様一人ひとりに合わせた体験を提供するために、お客様のデータを収集し、使用することを許可いただけるかどうかお答えください。

体験をカスタマイズすることのメリットにつきましては、本サイトのプライバシー設定の管理でご確認いただけます。弊社のプライバシー ステートメントでも、選択肢について詳しく説明しております。