For Purchases in Australia, New Zealand and Fiji, Marshall Islands, Nauru, Niue, Palau, Papua New Guinea, Pitcairn Island, Samoa, Solomon Islands, Tonga, Tuvalu, and Vanuatu (the "Pacific Islands").
Your online purchase transaction ("Transaction") is subject to the terms and conditions set out below which create a contract (the "Agreement") between you and by Autodesk Australia Pty Ltd, having its principal place of business at Space, Level 17, 1 Denison Street, North Sydney, NSW 2060, Australia ("Autodesk") governing that Transaction upon Autodesk’s acceptance of Your Transaction order. Read these terms and conditions carefully.
By submitting Your order You accept these terms and conditions in the Autodesk secured checkout process through which You place Your Transaction order (the "Online Cart"), (A) You acknowledge that You have read these terms and conditions, understand them, and agree to be legally bound to them, on behalf of the company or other legal entity for which you ("You") are acting ("Company") or if there is no Company, on behalf of Yourself as an individual; (B) you represent and warrant that you (i) have the right, power and authority to act on behalf of and bind Your Company (if any) or Yourself (if there is no such entity); (ii) are at least of the age of majority in Your jurisdiction of residence; and (iii) have exclusively relied upon the statements and representations expressly set out in this Agreement and not on any statement or representation of any Autodesk representative or any third party including any commercial agents, service providers or resellers).
These terms and conditions may change from time to time, so review them upon submission of each order, even if You have reviewed them before. Autodesk recommends that You print and keep a copy of these terms and conditions (and any other documents referred to in these terms and conditions) for Your reference. Autodesk retains version control of all terms and condition, and a copy of the terms and conditions in effect on the date You place Your order can be provided upon request.
Note that Your use of the products, services and/or subscriptions You purchase are subject to additional Terms of Use (as defined below).
1.1 By clicking on the “Submit Order”, “Buy” or similarly termed button You are placing a Transaction order online to purchase products, services and/or subscriptions from Autodesk subject to these terms and conditions.
1.2 By submitting Your information to Autodesk in relation to Your Transaction order, You consent to such information being processed to fulfil Your Transaction order and in accordance with Autodesk’s Privacy Statement. The Autodesk Privacy Statement is incorporated by reference into and is made a part of these terms and conditions.
1.3 A Transaction order submitted by You constitutes an irrevocable offer by You to Autodesk to purchase the products and/or services and/or subscriptions named in the Transaction order subject to these terms and conditions at the price quoted in the Online Cart for those products and/or services and/or subscriptions, and is subject to subsequent acceptance and fulfilment by Autodesk, irrespective of whether the button or link You press or activate to submit Your Transaction order to Autodesk includes words such as “Buy” or otherwise could be interpreted as the final step in completion of Your Transaction order. A renewal order, when applicable, as set forth in Section 8 of these terms shall constitute a different Transaction.
1.4 You will receive an order confirmation/receipt from Autodesk once Your Transaction order has been received and sent to be processed for fulfilment. Note that any such acknowledgement does not constitute a formal acceptance of Your Transaction order and such acceptance shall not occur until Autodesk has made the products, services and/or subscriptions named in the Transaction available to You in accordance with Section 6 of this Agreement. Autodesk may cancel Your Transaction order or any renewal (as applicable) at any time and for any reason prior to fulfilling Your Transaction order or Your renewal (as applicable); if this is the case, Autodesk will refund any prior payment that You have made for that/those products, services and/or subscriptions.
1.5 If Autodesk is unable to process payment using the payment method You provided with Your Transaction order, You otherwise fail to make a payment when due, or if Autodesk has reason to believe that You (i) are otherwise in breach of these terms and conditions, and/or any other agreement You may have with us, or (ii) by virtue of applicable law are ineligible to purchase or use products or services or subscriptions purchased via the Online Cart; or (iii) have engaged in fraud or criminal activity in connection with Your use of any products or services or subscriptions, then, without prejudice to any of Autodesk’s other rights, Autodesk may do any or all of the following: (a) stop any products or services or subscriptions being fulfilled to You; (b) stop or suspend ongoing access to products or services or subscriptions; or (c) cancel any automatic renewal plan in which You have elected to participate.
1.6 Without limiting the generality of any other section of this Agreement, Autodesk reserves the right to limit or refuse any Transaction order You place with Autodesk. Further, Autodesk reserves the right to verify the validity of all Transaction orders and/or cancel any Transaction orders if Autodesk finds evidence of fraud, tampering and/or any other violation of the terms and conditions of this Agreement. Autodesk may, in its sole and absolute discretion, limit or cancel quantities purchased per person or per order. These restrictions may include Transaction orders placed by or under the same account, the same credit card, and/or Transaction orders that use the same billing and/or shipping address. If Autodesk cannot fulfil or refuse Your order in whole or in part for any reason, Autodesk will give you the option to cancel it entirely and Autodesk will refund any moneys paid in accordance with the Autodesk Return Policy.
2.1 The price for the products, services and/or subscriptions You order, and any additional charges applicable to Your Transaction order, will be quoted to You in the Online Cart applicable to those products, services and/or subscriptions and will also be indicated on Your order confirmation/receipt. These are the prices and charges that will be charged to Your credit card or other accepted payment method.
3.1 All prices quoted and amounts payable by You are exclusive of any tax, levy or similar governmental charge that may be assessed by any jurisdiction, including, without limitation, any federal, state, provincial/territorial or local sales, excise, use or goods and services taxes, or the equivalent, whether based on the delivery, possession or use of the products, services or subscriptions, or otherwise ("Taxes") except for net income, net worth or franchise taxes assessed on Autodesk. Any such Taxes to be collected or paid by Autodesk shall be Your responsibility and shall appear as a separate item on Your order confirmation/receipt (unless Autodesk receives a valid tax exemption certificate from You prior to processing Your Transaction order).
4.1 The Payment methods recognized by Autodesk are listed in the Online Cart. Only payment methods recognized by Autodesk will be accepted by Autodesk. Autodesk does not offer any credit terms, unless specifically indicated in the Online Cart. If You elect to use the services of a third-party payment or billing provider in connection with Your purchase from Autodesk, and provided Autodesk accepts payments from such third-party provider on Your behalf, Your use of such services will be subject to the third-party provider’s own terms and conditions. You may be required to create an account with such third-party provider and/or provide that third party provider with Your bank account or credit/debit card details. Autodesk may also conduct its own review of the third-party payment provider and decline payment from that third party at any time. Where Autodesk does not accept payment from the third-party payment or billing provider or the payment provider fails to make payment, You are responsible to make any payments due within the payment terms using a payment method recognized by Autodesk. Autodesk is not responsible for, and you agree to hold Autodesk harmless from and against, any liability resulting from the acts or omissions of any third-party payment or billing provider including, but not limited to, where any third-party payment provider or billing provider engaged by You asserts any ownership of any Autodesk Offering as a result of non-payment. Autodesk reserves the right, in its sole and absolute discretion, to change the permitted methods of payment, including without limitation, the credit cards and/or other types of payment options Autodesk is able to accept, at any time.
4.2 Payment shall be made by the payment method selected in Your Transaction order and in the currency identified in the Online Cart and any currency exchange costs, or bank commission associated with payment shall be borne by You. Autodesk will charge credit, debit cards, or other permitted payment method on fulfilling Your products and/or services and/or subscriptions to You. Autodesk reserves the right to verify and/or authorize credit or debit card payments prior to acceptance of Your Transaction order. Once Your Transaction order has been accepted Autodesk will send You an order confirmation/receipt confirming Your purchase and the amount that has been charged to You.
5.1 Products are licensed, not sold to You. All references in these terms and conditions to the sale, selling, quote or purchase of “products” which are software programs shall mean the sale of the applicable end user license to use with respect to software programs. Products, services and subscriptions purchased are subject to the terms in the General Terms, Special Terms, Subscription Benefits, Subscription Types and additional terms that accompany, or are otherwise designated by Autodesk as governing the use of and/or access to, those products and/or services ("Terms of Use"). The Terms of Use can be accessed here Terms of Use. There are significant additional terms and conditions, warranty disclaimers and liability limitations contained in the applicable Terms of Use, which Terms of Use are incorporated herein by reference. By clicking the “Submit Order”, “Buy” or similar button and/or accessing Your products, services and/or subscriptions, You agree that You have read and agree to be bound by, and to use each product, service and/or subscription in accordance with, these additional applicable Terms of Use.
6.1 Software products, services and/or subscriptions purchased by You will be made available to You for electronic download and/or access via the Autodesk Account associated with Your Transaction order or via another website or link designated by Autodesk, and (where applicable) a valid corresponding serial number for those products, services and/or subscriptions will be sent to the email address provided by You with Your Transaction order or associated with Your Autodesk Account. Applicable Terms of Use may contain restrictions on where the products, services and/or subscriptions may be accessed and used. Autodesk will have no obligation to make any products and/or services and/or subscriptions available for electronic download or access via an address outside Australia, New Zealand and the Pacific Islands.
7.1 You may cancel Your product, service and/or subscription purchase in accordance with the terms of the Autodesk Return Policy which are incorporated herein by reference.
8. Auto-Renewal of Services or Subscriptions.
8.1 If You purchase a service or subscription, then by clicking on the “Submit Order”, “Buy”, or similar termed button and completing Your purchase, You expressly request and authorize Autodesk to automatically renew Your service or subscription for successive renewal terms each equal in length to the initial term purchased by You, at the purchase price for Your initial term (plus any/all applicable taxes and other fees and charges), unless Autodesk notifies You of a price change (see below), using the payment information You provided for Your initial purchase, until You cancel in accordance with the Autodesk Return Policy.
8.2 For services or subscriptions of particular length initial terms (e.g. annual length terms), Autodesk will send You at least one email to remind You of each upcoming renewal of that service or subscription. Further, in the case of all/any services or subscriptions Autodesk will post a confirmation to Your Autodesk Account each time Your service or subscription is automatically renewed.
8.3 Autodesk may change the renewal price of Your service or subscription as of the next renewal date and Autodesk will provide You with prior notice if Autodesk does so. Prior to the effective date of Your renewal (which will be indicated in the notice provided to You), You can elect to cancel an automatic renewal for a particular service or subscription at any time and for any reason (including if You do not agree to a price change) by logging on to Your Autodesk Account and following the steps to cancel that automatic renewal.
8.4 Certain services or subscriptions, including Premium and Flex tokens that are not made available on a term basis, will not renew automatically and will require a new purchase upon expiration to continue accessing them.
9.1 TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AND SUBJECT ALWAYS TO CLAUSE 9.2, THE MAXIMUM CUMULATIVE AND AGGREGATE LIABILITY OF AUTODESK AND ITS AFFILIATES, SUBSIDIARIES AND RELATED COMPANIES, AND THEIR EMPLOYEES, OFFICERS, AND DIRECTORS, FOR ALL COSTS, LOSSES OR DAMAGES FROM CLAIMS ARISING UNDER OR RELATED IN ANY WAY, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, TO (1) EACH TRANSACTION AND/OR ANY RELATED BREACH OR NON-PERFORMANCE OF THIS AGREEMENT NO MATTER HOW FUNDAMENTAL, IS LIMITED TO YOUR DIRECT DAMAGES ONLY AND SHALL NOT EXCEED THE TOTAL VALUE OF THAT TRANSACTION; AND (2) ANY SUBSEQUENT RENEWAL TRANSACTION AND/OR ANY RELATED BREACH OR NON-PERFORMANCE OF THIS AGREEMENT NO MATTER HOW FUNDAMENTAL, IS LIMITED TO YOUR DIRECT DAMAGES ONLY AND SHALL NOT EXCEED THE TOTAL VALUE OF THAT RENEWAL TRANSACTION. FURTHER, IN NO EVENT SHALL EITHER YOU OR AUTODESK BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES OR FOR LOSS OF PROFITS, REVENUES, CONTRACTS, CUSTOMERS, LOSS OF USE, LOSS OF DATA, BUSINESS INTERRUPTION, COST OF REPLACEMENT GOODS OR SERVICES, OR FAILURE TO REALIZE EXPECTED COST SAVINGS EVEN IF ADVISED OF THE POSSIBILITY OF THE SAME OR THE SAME WERE REASONABLY FORESEEABLE. YOU ACKNOWLEDGE THAT THE AMOUNTS CHARGED FOR YOUR TRANSACTION OR FOR ANY RENEWAL TRANSACTION FAIRLY REFLECT THIS ALLOCATION OF RISK. SUBJECT ALWAYS TO CLAUSE 9.2, THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
9.2 CERTAIN LEGISLATION MAY IMPLY WARRANTIES, CONDITIONS, GUARANTEES OR IMPOSE OBLIGATIONS WHICH CANNOT BE EXCLUDED, RESTRICTED OR MODIFIED EXCEPT TO A LIMITED EXTENT. THIS AGREEMENT MUST BE READ SUBJECT TO THOSE STATUTORY PROVISIONS. IF THOSE STATUTORY PROVISIONS APPLY, NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, TO THE EXTENT TO WHICH AUTODESK IS ENTITLED TO DO SO, AUTODESK LIMITS ITS LIABILITY IN RESPECT OF ANY CLAIM UNDER THOSE PROVISIONS TO, AT ITS OPTION, THE SUPPLY OF THE GOODS OR SERVICES AGAIN OR THE PAYMENT OF THE COST OF REPAIR OR REPLACEMENT OF THE GOODS OR OF HAVING THE SERVICES SUPPLIED AGAIN.
10.1 In conformity with laws and regulations of the United States and other countries relating to international trade, You and Your employees (if applicable), agents and third parties shall not disclose, export or re-export, directly or indirectly, any product, service, documentation or technical data (or direct products or services thereof) to any country, entity or other party which is ineligible to receive such items under U.S. laws and regulations as modified from time to time by the U.S. Department of Commerce or the U.S. Department of the Treasury or under other laws or regulations to which You may be subject.
11.1 This Agreement (and the documents incorporated herein by reference) constitute the entire agreement between You and Autodesk with respect to the subject matter hereof and merges and supersedes all prior agreements, understandings, negotiations and discussions, whether oral or written, between You and Autodesk or any of its commercial agents, service providers and resellers, and there are no warranties, representations or other agreements between You and Autodesk in connection with the subject matter hereof except as specifically set forth in this Agreement. You further acknowledge and agree that no additional or different terms or conditions submitted on any purchase order or other order document issued by You or otherwise referred to by You, including any preprinted terms, shall be applicable to this Agreement or binding on Autodesk unless specifically agreed to in writing by an authorized representative of Autodesk. You acknowledge and agree that i) Autodesk is under no obligation to proceed with or implement any Autodesk business or product plans, product roadmaps and proposed products specifications that Autodesk or any of its commercial agents, service providers and resellers may have discussed with You, including those discussed pursuant to confidentiality agreements; ii) any statements by Autodesk or any of its commercial agents, service providers and resellers, including in connection with such plans, are not intended to be a promise or guarantee of future delivery of products, services or features; and (iii) You do not rely on, and shall have no remedy in respect of, any promise, assurance, undertaking, representation or statement made (whether innocently or negligently) by any other party or any other person, including any of Autodesk’s commercial agents, service providers and resellers, except as expressly set out in this Agreement and (iv) no Autodesk commercial agent (if applicable) has any express or implied right or authority to assume or create any obligations on behalf of or in the name of Autodesk or to bind Autodesk to any obligation, contract, agreement, or undertaking with You.
12.1 Autodesk may engage the services of subcontractors or service providers to assist Autodesk in the performance of its obligations under this Agreement. Autodesk may assign all or any of its rights or obligations under this Agreement without Your consent or notice to You. You may not assign or transfer Your rights under this Agreement without Autodesk’s express written consent, and any purported assignment or transfer shall be void.
12.2 No relaxation, forbearance, delay or indulgence by either You or Autodesk in enforcing any of the terms and conditions of this Agreement or the granting of time by either party to the other shall prejudice or restrict such rights and powers. No waiver of any term or condition of this Agreement shall be effective unless made in writing by the party making such waiver.
12.3 If for any reason a court of competent jurisdiction finds any provision or portion of any terms and conditions of this Agreement to be illegal, unenforceable, or invalid under applicable law in a particular jurisdiction in relation to the Transaction to which this Agreement relates, the remainder of these terms and conditions of this Agreement (to the fullest extent permitted by law) will continue in full force and effect in relation to that Transaction.
12.4 Autodesk shall not be in breach of this Agreement in the event that it is unable to perform its obligations due to unforeseeable circumstances or causes beyond its reasonable control.
12.5 You shall hold in confidence all pricing and business information disclosed by Autodesk or any of its commercial agents, service providers and resellers.
13.1 Any action or case arising out of or in connection with this Agreement must be brought under the governing law and forum set forth in the Terms of Use. Notwithstanding the foregoing, Autodesk may apply for injunctive relief and other equitable remedies (or their equivalent) in any jurisdiction or forum.
13.2 The United Nations Convention on Contracts for the International Sale of Goods shall not apply to these terms and conditions.
Autodesk Australia Pty Ltd, Space, Level 17, 1 Denison Street, North Sydney, NSW 2060, Australia
