Module
20 min.
Using GIS Data and the Autodesk Connector for ArcGIS
Module overview
The focus of this module is GIS data. Many projects begin and end with the utilization of GIS data. In this module, we will explore the many options of using, editing and analyzing GIS data within Autodesk Civil 3D. Join us as we explore the new Autodesk Connector for ArcGIS, the planning and analysis tools that Civil 3D has to offer and then export Civil and AutoCAD data out to a GIS format.
This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:
- Connect GIS data to your Civil 3D project using the ESRI Connector
- Utilize GIS data in your project
- Edit and analyze GIS data in Civil 3D
- Share GIS data from Civil 3D with others
Module pre-requisites
This module requires user-level knowledge of Civil 3D and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:
- Built-in tutorials, available via in-product Help
- eLearning Partners
- Authorized Training Centers
About the author
This module was created by Shawn Herring.
Before you start
- Please make sure you have the Civil 3D software loaded.
- If you have technical difficulties, please reach out to product support.
Module downloads
These downloadable resources will be used to complete units in this module: