Module
10 min.
Generative Design Connected Learning Part 1: What is Generative Design
Module overview
Knowing a little more detailed information about what generative design is and how it can be used will give the proper background to starting later exercises.
You will learn:
- How to outline what is Generative Design.
- What are the benefits of Generative Design.
- How it compares to topology optimization.
About the author
This content was created by Apolo Vanderberg, Autodesk Designated Specialist and Instructor focused on CFD and Generative Design.
Before you start
- Please make sure you have Autodesk Fusion software loaded and installed.
- If you have technical difficulties, please reach out to product support.
- To collaborate with other industry professionals taking the module, or if you have questions or feedback during the module, please visit the module forum.
DISCLAIMER: This content demonstrates methods that can be applied when completing a simulation study in order to demonstrate software capabilities and possible workflows. The simulation study shown follows design assumptions that are not mentioned in the videos – users should apply engineering judgement when working on their own project.
Module downloads
These downloadable resources will be used to complete units in this module: