Create a collected multileader using the wrap option, and specify the wrap width and number.
Transcript
00:04
Start the collect tool.
00:07
When the program prompts you to select multi
00:09
leaders select them again in numerical order.
00:16
Once all four have been selected, right click or press enter
00:21
on the command line,
00:23
you can see that vertical is now the current option,
00:27
right, click and choose the wrap option.
00:31
When you choose this option,
00:33
the program prompts you to specify the wrap width or number.
00:38
If you enter a wrap with the program determines how
00:42
many blocks will fit in the width you specified.
00:45
For example type 20
00:48
press enter
00:49
the preview immediately updates
00:52
since three blocks can fit within the wrap with you entered,
00:56
there are three blocks on the first row
00:59
and the remaining block wraps onto a second row.
01:03
Since you have not yet specified the collected multi leader location,
01:07
right, click again and choose wrap.
01:11
This time when the program prompts you to specify the wrap width,
01:15
right, click and choose number.
01:18
Now the program prompts you to specify the maximum number of blocks per row
01:23
type two and press enter.
01:27
Now the preview shows two blocks per row.
01:31
When you specify the collected multi leader location,
01:34
the multi leaders are collected
01:36
and the command ends.
00:04
Start the collect tool.
00:07
When the program prompts you to select multi
00:09
leaders select them again in numerical order.
00:16
Once all four have been selected, right click or press enter
00:21
on the command line,
00:23
you can see that vertical is now the current option,
00:27
right, click and choose the wrap option.
00:31
When you choose this option,
00:33
the program prompts you to specify the wrap width or number.
00:38
If you enter a wrap with the program determines how
00:42
many blocks will fit in the width you specified.
00:45
For example type 20
00:48
press enter
00:49
the preview immediately updates
00:52
since three blocks can fit within the wrap with you entered,
00:56
there are three blocks on the first row
00:59
and the remaining block wraps onto a second row.
01:03
Since you have not yet specified the collected multi leader location,
01:07
right, click again and choose wrap.
01:11
This time when the program prompts you to specify the wrap width,
01:15
right, click and choose number.
01:18
Now the program prompts you to specify the maximum number of blocks per row
01:23
type two and press enter.
01:27
Now the preview shows two blocks per row.
01:31
When you specify the collected multi leader location,
01:34
the multi leaders are collected
01:36
and the command ends.
