Use the Shop Drawing command tool to produce and make changes to precast assembly drawings.
Tutorial resources
These downloadable resources will be used to complete this tutorial:
Transcript
00:03
In Revit, you can use the Shop Drawing command tool to produce and make changes to precast assembly drawings.
00:12
Navigate to the desired RVT file, and then open it.
00:17
First, in the drawing, select an already reinforced element assembly from which the shop drawing will be created.
00:26
Then, from the Precast tab, Fabrication panel, click Shop Drawings.
00:33
If you are prompted to do so, load the structural precast title blocks.
00:38
The shop drawing is generated and placed under Assemblies in the Project Browser.
00:45
To change a shop drawing, from the Precast ribbon, Configuration panel, click Configuration.
00:53
In the Configuration dialog tree view, navigate to the shop drawing you want to change.
00:60
Then, customize the drawing settings as needed.
01:04
In the drawing, select the assembly or assemblies from which the drawings will be created, and then click Shop Drawings.
01:14
The Precast for Revit – Existing views dialog appears, prompting you to:
01:20
Select Delete old views and create new ones to replace old shop drawings;
01:28
Select Create additional views to create additional shop drawings with the current configuration options;
01:36
or Click Cancel operation to cancel the new shop drawings.
00:03
In Revit, you can use the Shop Drawing command tool to produce and make changes to precast assembly drawings.
00:12
Navigate to the desired RVT file, and then open it.
00:17
First, in the drawing, select an already reinforced element assembly from which the shop drawing will be created.
00:26
Then, from the Precast tab, Fabrication panel, click Shop Drawings.
00:33
If you are prompted to do so, load the structural precast title blocks.
00:38
The shop drawing is generated and placed under Assemblies in the Project Browser.
00:45
To change a shop drawing, from the Precast ribbon, Configuration panel, click Configuration.
00:53
In the Configuration dialog tree view, navigate to the shop drawing you want to change.
00:60
Then, customize the drawing settings as needed.
01:04
In the drawing, select the assembly or assemblies from which the drawings will be created, and then click Shop Drawings.
01:14
The Precast for Revit – Existing views dialog appears, prompting you to:
01:20
Select Delete old views and create new ones to replace old shop drawings;
01:28
Select Create additional views to create additional shop drawings with the current configuration options;
01:36
or Click Cancel operation to cancel the new shop drawings.
