Schedules for architectural design - Placing and splitting a room schedule on to sheets

Transcript

00:03

So now that we have the schedule organized,

00:06

we need to place it onto a sheet.

00:08

And as it's quite a long schedule, it won't actually fit onto one sheet

00:12

and looking at the project browser here,

00:13

we can see that we actually have three sheets created.

00:16

room schedule 0102 and 03.

00:20

And we will split the schedule across these sheets.

00:23

So we'll go up to the modified schedules and

00:25

quantities ri here and from the split panel,

00:27

we'll click split and place.

00:30

So now we need to select those three sheets to split the schedule across

00:34

and looking at the height on sheet panel here, we can see it's set to split evenly.

00:39

So I click split in place

00:42

and now we can see it's opened up the room schedule 01 sheet here.

00:46

And we need to place the schedule onto the sheet

00:49

and this will set the location for the other sheets as well.

00:53

So place it in the center of this sheet.

00:56

And now

00:56

going back to the project browser here, if I expand out the schedules group

01:01

and then expand out the room schedule,

01:03

we can see that we now have those split schedules.

01:06

So one of 32 or three and three of three

01:09

and that their sheet placement icons are

01:11

showing that they've all been placed on sheets

01:14

and looking at the sheets below. If we expand those out,

01:16

we can see that each one of those schedules is placed onto a corresponding sheet.

01:21

So let's open up the other two sheet views

01:25

and we can see that that schedule has been placed in the similar location on both

01:31

and we'll tile the views so that we can see all three schedules at once.

01:34

But first, I'll close down the room schedule view

01:38

and then the floor three layout view.

01:40

And now I'll go to the windows panel on the view ribbon tab here and click tile views

01:46

on the navigation bar here. I'll click zoom all to fit so we can see all three views.

01:51

Now, I'll zoom into the 01 room schedule here.

01:57

And if I select it,

01:58

we can see that we have the controls for the column width here.

02:01

So I'll drag the name column wider so that it doesn't split across two lines.

02:06

And then when we finish,

02:07

we can see that that also updates on the other two sheets as well.

02:11

Now, I would like to split the schedule so that each level is on its own sheets

02:16

and we can see here that on the first sheet

02:18

that we have some floor three at the bottom here.

02:21

So with that schedule selected,

02:24

we'll use the drag control at the bottom here and we'll drag this up.

02:27

So that floor three is no longer visible.

02:33

And we can see that this will then get added onto the schedule two view just here

02:38

and zooming into this view.

02:40

We can see that we don't quite have all of floor three on here.

02:44

So we'll select the schedule in this view and then using the drag controls,

02:48

we can drag that down.

02:49

So that includes all the floor three.

02:53

So now that's a little bit low on the sheet, we need to reposition it.

02:57

So we'll select it again

02:58

and then

02:59

we can use the arrow keys on the keyboard

03:02

to nudge it up slightly.

03:04

And that now fits perfectly on the sheet

03:06

and looking at the room schedule 03 view here,

03:09

we can see that that now has just floor four on here

03:12

and it also displays the grand totals at the bottom of that sheet.

03:17

So I click zoom all to fit once more.

03:19

And now that we have that schedule split and placed across the three sheets here

03:23

that finishes creating the room schedule.

Video transcript

00:03

So now that we have the schedule organized,

00:06

we need to place it onto a sheet.

00:08

And as it's quite a long schedule, it won't actually fit onto one sheet

00:12

and looking at the project browser here,

00:13

we can see that we actually have three sheets created.

00:16

room schedule 0102 and 03.

00:20

And we will split the schedule across these sheets.

00:23

So we'll go up to the modified schedules and

00:25

quantities ri here and from the split panel,

00:27

we'll click split and place.

00:30

So now we need to select those three sheets to split the schedule across

00:34

and looking at the height on sheet panel here, we can see it's set to split evenly.

00:39

So I click split in place

00:42

and now we can see it's opened up the room schedule 01 sheet here.

00:46

And we need to place the schedule onto the sheet

00:49

and this will set the location for the other sheets as well.

00:53

So place it in the center of this sheet.

00:56

And now

00:56

going back to the project browser here, if I expand out the schedules group

01:01

and then expand out the room schedule,

01:03

we can see that we now have those split schedules.

01:06

So one of 32 or three and three of three

01:09

and that their sheet placement icons are

01:11

showing that they've all been placed on sheets

01:14

and looking at the sheets below. If we expand those out,

01:16

we can see that each one of those schedules is placed onto a corresponding sheet.

01:21

So let's open up the other two sheet views

01:25

and we can see that that schedule has been placed in the similar location on both

01:31

and we'll tile the views so that we can see all three schedules at once.

01:34

But first, I'll close down the room schedule view

01:38

and then the floor three layout view.

01:40

And now I'll go to the windows panel on the view ribbon tab here and click tile views

01:46

on the navigation bar here. I'll click zoom all to fit so we can see all three views.

01:51

Now, I'll zoom into the 01 room schedule here.

01:57

And if I select it,

01:58

we can see that we have the controls for the column width here.

02:01

So I'll drag the name column wider so that it doesn't split across two lines.

02:06

And then when we finish,

02:07

we can see that that also updates on the other two sheets as well.

02:11

Now, I would like to split the schedule so that each level is on its own sheets

02:16

and we can see here that on the first sheet

02:18

that we have some floor three at the bottom here.

02:21

So with that schedule selected,

02:24

we'll use the drag control at the bottom here and we'll drag this up.

02:27

So that floor three is no longer visible.

02:33

And we can see that this will then get added onto the schedule two view just here

02:38

and zooming into this view.

02:40

We can see that we don't quite have all of floor three on here.

02:44

So we'll select the schedule in this view and then using the drag controls,

02:48

we can drag that down.

02:49

So that includes all the floor three.

02:53

So now that's a little bit low on the sheet, we need to reposition it.

02:57

So we'll select it again

02:58

and then

02:59

we can use the arrow keys on the keyboard

03:02

to nudge it up slightly.

03:04

And that now fits perfectly on the sheet

03:06

and looking at the room schedule 03 view here,

03:09

we can see that that now has just floor four on here

03:12

and it also displays the grand totals at the bottom of that sheet.

03:17

So I click zoom all to fit once more.

03:19

And now that we have that schedule split and placed across the three sheets here

03:23

that finishes creating the room schedule.

Was this information helpful?

Cookie preferences

Your privacy is important to us and so is an optimal experience. To help us customize information and build applications, we collect data about your use of this site.

May we collect and use your data?

Learn more about the Third Party Services we use and our Privacy Statement.

Are you sure you want a less customized experience?

We can access your data only if you select "yes" for the categories on the previous screen. This lets us tailor our marketing so that it's more relevant for you. You can change your settings at any time by visiting our privacy statement

Your experience. Your choice.

We care about your privacy. The data we collect helps us understand how you use our products, what information you might be interested in, and what we can improve to make your engagement with Autodesk more rewarding.

May we collect and use your data to tailor your experience?

Explore the benefits of a customized experience by managing your privacy settings for this site or visit our Privacy Statement to learn more about your options.

Placing and splitting a room schedule on to sheets

Cookie preferences

Strictly necessary – required for our site to work and to provide services to you

Improve your experience – allows us to show you what is relevant to you

Customize your advertising – permits us to offer targeted advertising to you

Strictly necessary – required for our site to work and to provide services to you

Improve your experience – allows us to show you what is relevant to you

Customize your advertising – permits us to offer targeted advertising to you

Are you sure you want a less customized experience?

Your experience. Your choice.

Cookie preferences

Strictly necessary – required for our site to work and to provide services to you

Improve your experience – allows us to show you what is relevant to you

Customize your advertising – permits us to offer targeted advertising to you

THIRD PARTY SERVICES

Strictly necessary – required for our site to work and to provide services to you

Improve your experience – allows us to show you what is relevant to you

Customize your advertising – permits us to offer targeted advertising to you

Are you sure you want a less customized experience?

Your experience. Your choice.