Navigate the facility, viewer settings, and data visualization options for your digital twin in Autodesk Tandem.
Transcript
00:03
Upon entering a facility in Tandem, you can use the menus in the header and footer navigation bars to interact with your digital twin.
00:11
These tools enable you to configure viewer settings, navigate the model within the viewer,
00:18
and apply the Connections and Streams features as desired.
00:22
With a facility open, expand the Profile menu and select Viewer Settings.
00:29
From the Configuration tab, you can toggle viewer options on or off, such as WebGPU,
00:37
which improves performance when loading large or detailed models.
00:41
The Navigation tab includes ViewCube, Orbit, and Zoom settings, as well as an option for left-handed mouse users.
00:49
Open the Appearance tab for visual quality optimization, and on the Environment tab, you can select an environment and lighting.
00:59
Next, expand the Viewer Controls menu to navigate the model within the viewer.
01:05
From here, you can select Orbit, Select, Pan, and Zoom, and more.
01:10
Each control is assigned a quick key, indicated by the letters next to the controls.
01:16
Simply press the corresponding letter to immediately activate the desired function in the viewer.
01:22
For example, press Z, and then move the cursor up or down to zoom in or out.
01:30
Next, expand the Analysis Tools menu, which includes both measuring and viewer sectioning tools.
01:37
When you select Section, you can choose to view the model in sections along the X, Y, or Z plane.
01:45
Moving down to the footer navigation,
01:47
expand the Labels toggle menu to select Level and Room Labels.
01:53
This makes the labels visible in the model and, as a result, provides access to their filtering capabilities.
02:00
Lastly, expand the Data Visualization menu to access visual controls for the Connections and Streams features.
02:08
Here, you can choose to show heatmapping and stream pins, which display the facility streamed data.
02:15
With Heatmap enabled, in the viewer, click Select heatmap to choose from a list of available Streams, such as Inside Temperature.
02:25
From the Stream Pins flyout, you can view stream pins based on their status
02:29
and single or multi-select to quickly customize the viewer according to your needs.
02:35
When you are finished working in the facility, click the Tandem logo to return to the Home page.
02:41
Now you can interact with your digital twin using the header and footer navigation bars.
00:03
Upon entering a facility in Tandem, you can use the menus in the header and footer navigation bars to interact with your digital twin.
00:11
These tools enable you to configure viewer settings, navigate the model within the viewer,
00:18
and apply the Connections and Streams features as desired.
00:22
With a facility open, expand the Profile menu and select Viewer Settings.
00:29
From the Configuration tab, you can toggle viewer options on or off, such as WebGPU,
00:37
which improves performance when loading large or detailed models.
00:41
The Navigation tab includes ViewCube, Orbit, and Zoom settings, as well as an option for left-handed mouse users.
00:49
Open the Appearance tab for visual quality optimization, and on the Environment tab, you can select an environment and lighting.
00:59
Next, expand the Viewer Controls menu to navigate the model within the viewer.
01:05
From here, you can select Orbit, Select, Pan, and Zoom, and more.
01:10
Each control is assigned a quick key, indicated by the letters next to the controls.
01:16
Simply press the corresponding letter to immediately activate the desired function in the viewer.
01:22
For example, press Z, and then move the cursor up or down to zoom in or out.
01:30
Next, expand the Analysis Tools menu, which includes both measuring and viewer sectioning tools.
01:37
When you select Section, you can choose to view the model in sections along the X, Y, or Z plane.
01:45
Moving down to the footer navigation,
01:47
expand the Labels toggle menu to select Level and Room Labels.
01:53
This makes the labels visible in the model and, as a result, provides access to their filtering capabilities.
02:00
Lastly, expand the Data Visualization menu to access visual controls for the Connections and Streams features.
02:08
Here, you can choose to show heatmapping and stream pins, which display the facility streamed data.
02:15
With Heatmap enabled, in the viewer, click Select heatmap to choose from a list of available Streams, such as Inside Temperature.
02:25
From the Stream Pins flyout, you can view stream pins based on their status
02:29
and single or multi-select to quickly customize the viewer according to your needs.
02:35
When you are finished working in the facility, click the Tandem logo to return to the Home page.
02:41
Now you can interact with your digital twin using the header and footer navigation bars.
