Introduction to: InfraWorks for road and highway design - Quiz

Introduction to: InfraWorks for road and highway design - Quiz

Required for course completion

22 questions

In order to create a 3D Animation, you must:

(Select one)
Select an answer

In order to do separate layouts of an intersection, it is best to:

(Select one)
Select an answer

On import, the default coordinate system for InfraWorks is:

(Select one)
Select an answer

You have 2019 Civil 3D and Infraworks 2021 installed, in order to import an Infraworks model into Civil 3D, you must use:

(Select one)
Select an answer

 These 2 options produce multiple designs that can be compared for cost and environmental impact:

Select up to 2
Select an answer

________ Simulation and __________ Simulation use advanced matrices for these 2 simulation animations to play in your model.

Select up to 2
Select an answer

This tool helps identify blind spots or sight failure zones, where sight is compromised by obstructions?

(Select one)
Select an answer

 What are the 3 types of views in the Cross Section Viewer?

Select up to 3
Select an answer

What controls the visibility and settings for terrain contour lines and elevation text?

(Select one)
Select an answer

An example of a Terrain Theme is:

(Select one)
Select an answer

A ramp or overpass is created when an intersection becomes _________.

(Select one)
Select an answer

When 2 component roads intersect, 2 intersection types become available, they are:

Select up to 2
Select an answer

Intersections are automatically added when?

Select up to 4
Select an answer

You can add a Superelevation to which of the road types?

(Select one)
Select an answer

An example of a parametric decoration is? Pick 2.

Select up to 2
Select an answer

You can add any component road assembly to the _________ by selecting the road, right clicking and selecting Add to _________:

(Select one)
Select an answer

You can convert a Planning Road to a:

(Select one)
Select an answer

Splitting roadside gradings into sections (or regions) is referred to as:

(Select one)
Select an answer

When 2 component roads intersect, 2 intersection types become available, they are?

Select up to 2
Select an answer

There are 2 Types of roads utilized in InfraWorks, they are:

Select up to 2
Select an answer

There are 2 options for Roadside Grading Performance, they are:

Select up to 2
Select an answer

The UNITS CONFIGURATION is found within Infraworks at this location:

(Select one)
Select an answer

22/22 questions left unanswered

Was this information helpful?