Run a flow simulation in an electronics enclosure model
How to run a flow simulation in an electronics enclosure model, after the materials and boundary conditions have been defined.
Type:
Tutorial
Length:
2 min.
Related learning
Tutorial2 min.
Visualize flow and temperature with iso surfaces in an electronics enclosure model
CFD
Tutorial2 min.
Visualize temperature distribution in an electronics enclosure model
CFD
Tutorial2 min.
Visualize the flow with a results plane in an electronics enclosure model
CFD
Tutorial1 min.
Define mesh automatically in an electronics enclosure model
CFD
Tutorial2 min.
Apply thermal dissipation to a transformer in an electronics enclosure model
CFD
Tutorial2 min.
Apply thermal dissipation to two capacitors in an electronics enclosure model
CFD
Tutorial2 min.
Apply thermal dissipation to the large chip in an electronics enclosure model
CFD
Tutorial2 min.
Apply thermal dissipation to small chips in an electronics enclosure model
CFD
Tutorial1 min.
Define the outlet boundary in an electronics enclosure model
CFD
Tutorial2 min.
Define inlet conditions in an electronics enclosure model
CFD