Module
20 min.
Using the Sheet Set Manager in Civil 3D
Module overview
Before you start creating your templates, it is important to understand that you will need a Sheet Set template (.dst) and an overall project drawing template (.dwt). In this module, you will learn how to create a Sheet Set template to be used on multiple projects. You also set up the project template drawing file (title block) that the properties can be modified from project to project. Finally, you will link the two templates together to populate and create common data throughout the project lifecycle.
This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:
- Create a standard sheet set template
- Create a standard drawing template
- Use both templates to connect data
Before you start
- Please make sure you have the Civil 3D software loaded.
- If you have technical difficulties, please reach out to product support.