Installation for administrators

Configure and start your network license server


Create a debug log file, configure your network licence server, start it, and confirm that it's running.


Create a debug log file

Debug log files contain Network Licence Manager (NLM) history that you can review to troubleshoot problems with your licence servers.

  1. Create a subfolder named Logs under the folder in which you installed NLM.
  2. Use a text editor to create a text file in the Logs subfolder.
  3. Give the text file any name you like, but be sure to change the filename extension from .txt to .log.

Configure the licence server

Configuration methods differ according to your operating system. For Windows network servers, use the LMTOOLS utility provided with Network Licence Manager (NLM).

To configure a Windows server

  1. Open the LMTOOLS utility. In Windows, click Start > Autodesk > LMTOOLS Utility.
  2. From the Service/Licence File tab, verify that the Configuration Using Services option is selected.
  3. Select the checkbox LMTOOLS Ignores Licence File Path Environment Variables.
  4. From the Config Services tab, use the Service Name drop-down menu to specify a name.
  5. Specify paths for these three files:
    • Path to the lmgrd.exe file: Browse to select the file in your NLM folder.
    • Path to the licence file: Browse to select the licence file you obtained from Autodesk.
    • Path to the debug log file: Browse to select the debug log file you created earlier.
      Note:  Be sure that users and services have write access to the debug log file or folder.
  6. Select Use Services. Then select Start Server At Power Up. This setting ensures that the licence server starts automatically after maintenance or a power outage.
  7. Click Save Service and confirm.

To configure a macOS or Linux server

  1. Save your licence .lic file to the desktop.
  2. Move the licence file from the desktop to this hidden folder:
    • For macOS: /usr/local/flexnetserver
    • For Linux: /opt/flexnetserver

Note: For details about setting up NLM for macOS, see How to set up the Autodesk Network Licence Manager on a Mac (US Site). For Linux, see How to set up the Autodesk Network Licence Manager on Linux (US Site).

 

Start the licence server

After configuration, you can start the licence server.

To start the licence server on Windows

Use the LMTOOLS utility:

  1. From the Start/Stop/Reread tab, verify that the correct server name is highlighted. Then click Start Server.
  2. Verify that the licence server has started (within 30 seconds). You should see the message 'Server Start Successful' at the bottom of the dialogue.

To start the licence server on macOS or Linux

Use Terminal:

  1. To get to the directory, enter the following commands:
    • For macOS:
      cd /usr/local/flexnetserver
    • For Linux:
      cd /opt/flexnetserver
  2. To list the directory contents, enter this command:
    • ls
  3. To start the licence server, enter this command:
    • For macOS:
      sudo ./lmgrd -c /usr/local/flexnetserver/adsk_server.lic -l/usr/local/flexnetserver/adsk_serverLog.log
    • For Linux:
      sudo ./lmgrd -c /opt/flexnetserver/adsk_server.lic -l/opt/adsk_serverLog.log
    •  

Confirm that the licence server is running

To confirm in Windows

  1. From the Server Status tab of the LMTOOLS utility, click Perform Status Enquiry.
  2. When you see information in the status window, scroll down and verify that:
    • The licence server is running the latest version. Check the line that reads something like:
      YourServerName: licence server UP (MASTER) v 11.16.2
    • The licence server has successfully read the licence file and found no errors. You should see a line that reads something like:
      Adskflex: UP v11.16.2
  3. If you don’t see these two lines, the licence server didn’t start correctly. Recheck your work to get and configure the licence file.

To confirm in macOS

  • In Terminal, enter this command:
    sudo ./lmutil lmstat -a -c /usr/local/flexnetserver/adsk_server.lic

To confirm in Linux

  • Enter the following command:
    sudo ./lmutil lmstat -c @localhost -a

Note: If you get a message that the server has not started, use the Activity Monitor to find and stop the lmgrd process. You can then restart the licence server.


Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.


What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.

View levels of support